Everything you need to know about used oil recycling and oil filtration systems

 Fuel used in power or distribution transformers is generally referred to as transformer oil. It is normally obtained by fractional distillation and subsequent crude petroleum treatment. That is why this oil is often referred to as an insulating mineral oil.  Used oil recycling is a solution to the Environment Protection and a step towards the greener economy. Transformer oil helps in two ways: liquid insulation in an electrical power transformer and heat dissipation by two transformers. Transformers are considered as one of the most important equipment of the power network as their service in distribution of the generated power is most significant. Therefore, maintenance of such transformers become more responsible as sudden failures in transformer leads to heavy interruptions in power supply. The effective functioning of such transformers depends on the insulation condition of the equipment. The quality of the oil used in transformers (Liquid insulation) determines the reliable working of the transformer and hence ensures the life of transformer.

Transformer Oil Filtration :

To extend the life of transformer the oil used in the transformer has to be  purified  by oil filtration system once in a while . Now a days this can be done onsite by using advanced machines and skilled engineers. To purify the transformer oil high vacuum oil filtration system machine is engaged. The oil from the transformer is pumped into the inlet and oil gets prepared for processing without any interruptions.  The temperature of the transformer oil is raised to a particular level by the heaters present in the machine which separates the moisture from the oil. The heaters are controlled to avoid any overheating. Then the oil is made to fed through the respective oil filtration system. The sludge material present in the insulating oil is removed by filtering through series of filters present inside the high vacuum oil filtration machine. The last important step is to admit the oil in to the degassing chamber. The chamber is allowed to be at high vacuum where the dissolved gases found in the contaminated transformer oil is processed stage by stage to get purified. A discharging pump is also designed in this chamber through which the degassed oil is taken out.  Now the filtered oil is analyzed for its quality which would be better when compared with the values before oil filtration.